Moog DDW10CR Instructions d'exploitation télécharger pdf (Page 18)

Z0 (LS nibble)

30H - 3FH

Position data is 30H ored with data nibble

Z03, Z02, Z01, Z00 of zoom lens position data.

F2 (MS nibble)

30H - 3FH

Position data is 30H ored with data nibble

F11, F10, F09, F08 of focus data.

30H - 3FH

Position data is 30H ored with data nibble

F07, F06, F05, F04 of focus data.

F0 (LS nibble)

30H - 3FH

Position data is 30H ored with data nibble

F03, F02, F01, F00 of focus data.

Terminator and

Checksum

80H - 8FH Most signicant nibble is always 8. Least signicant (LS) nibble is the XOR of all

previous bytes (LS nibble only) except for leading autobaud character F8H.

3.9 Latch Commands

The camera commands control parameters of camera operation. All the Camera commands generate a Latch Status response message.

FUNCTION Byte #3 Byte #4 DESCRIPTION

MANUAL IRIS TOGGLE

“L” “M” Toggles iris operation between auto iris and manual iris.

CAMERA POWER TOGGLE “L” “P” Toggles camera operation on and o.

LENS SPEED TOGGLE “L” “L” Toggles between high speed and low speed zoom

TOGGLE AUX1 &

AUTO WHITE BALANCE

“L” “1”

Toggles AUX1 output. Also puts camera into auto white

balance.

INCREASE BLUE GAIN** “B” “1” Increase Blue gain in camera.

INCREASE RED GAIN** “B” “2” Increase Red gain in camera.

STOP COLOR GAIN** “B” “0” Stop Red/Blue increase.

PRESET STATUS REQUEST “L” “?” Requests current camera status

3.10 Latch Status Response Message

BYTE DATA DESCRIPTION

1 F8H Snyc character

2 Address in hex Camera address (01H - DFH)

3 “L” Upper case “L”

1 2 ... 13 14 15 16 17 18 19 20

Pas de commentaire

Moog DDW10CR Instructions d'exploitation Page 18