Moog EXVF5C-1 Instructions d'exploitation télécharger pdf (Page 26)

2.2.0 System Conguration

Conguration / System

Under the Conguration section, select the System tab to perform the following operations:

• View product model information, current rmware version and serial number.

• Specify a custom name; this name can be used by third-party software to display a selected name for the device.

Enable edge recording by checking the “Use Recorder Module” checkbox. Disabling edge recording will accelerate

the device’s boot time.

To enable edge recording an SD card must be added to the camera interface card, located in the EXO system device.

SD cards are not provided as a standard feature. Directions for installing the SD card are provided in the rst section

of this installer manual. Edge recording set up is done through the Recording Tab in the Live Viewer EXO screen.

Note: Recording menu will only be displayed when user recorder module check box is selected. You must save,

and then reboot to complete selection.

SD Card: Use 2GB to 32 GB Micro SD Card of class 6 or above. You must make sure the card is formatted to

FAT32 or EXT3.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 45 46

Pas de commentaire

Moog EXVF5C-1 Instructions d'exploitation Page 26