2.5 AUTO TOUR
The VLC485 can accommodate pan/tilts that support Auto tour functions. To start a
pan/tilt on an Autotour, press the AUTO TOUR button. (For Pelco Protocols enter the
pattern before pressing Auto Tour)
CAM 01
AUTO
2.6 SEQUENCING
In conjunction with a multiplexer the VLC485 will sequence through a predetermined
list of up to 16 cameras. To start sequencing press the SEQUENCE button. The camera
number will show the currently active camera in the sequence and a camera select
command for the camera will be sent to the multiplexer.
To stop the Auto tour move the joystick. To SET AUTO TOUR DWELL, see Menu Section,
Item 3.4.
1, 2, 3...
CAM 01
SEQUENCING
To stop the sequence, press the SEQUENCE button or move the joystick. For
SEQUENCING OPTIONS, see Menu Section, Item 3.6.
3.0 CONTROL OF THE MENU ITEMS
3.1 CAMERA SELECTION
Additional functions are available through the menu on the VLC485. To access the
menu, press the MENU button.
To scroll through the various menu items press the STAR (#) key on the key pad. When
you're nished with your selections and want to leave menu mode, simply press the
MENU button again.
Access to the menu can be protected with a 4-digit password. See 3.9 PASSCODE to
enable the password function.
Here are the selectable settings in the menu mode:
1) Dome Type Selection
2) Multiplexer Selection
3) Preset Enable
4) Autotour Dwell (Available for Moog and Kalatel)
5) Set Beep
6) Sequence of Camera (when used with a multiplexer)
7) Sequence Dwell
8) Alarm Set
9) Master Unit (See page 8)
9) Pass Code Enable
3.1 DOME TYPE SELECTION
Moog designed the VLC485 to support RS485/422 control protocols from a number
of manufacturers. Dome type selection is independent of the camera position, which
means that you can build a system using multiple dome types.
TO CHANGE CAMERA PROTOCOL:
CAM 04
DOME TYPE
Moog
Select a camera.
The current pan/tilt type will display.
To select a different type press the
STAR (*) key until the desired type is
displayed.
Press the POUND (#) key to enter the
selection. Press MENU to exit the menu
mode.
Press the MENU button. Enter password
if necessary.
DOME TYPE
SENSORMATIC
3.2 MULTIPLEXER SELECTION
The VLC485 can also support multiplexers from a number of manufacturers to allow
the unit to control even more cameras.
TO SELECT A MULTIPLEXER TYPE:
The VLC485 can connect to one main multiplexer and an additional expansion
multiplexer if this feature is supported by the multiplexer. The main multiplexer is used
to handle camera numbers 1 through 16 while the expansion multiplexer is used to
handle camera numbers 17 through 32.
MUX TYPE
ATV
Use the POUND (#) key to scroll to the
Multiplexer Type. The current type will
be displayed.
Press the STAR (*) key until the desired
type is displayed. Press the POUND (#)
key to select. Press MENU to exit the
menu mode.
Press the MENU button. Enter password
if necessary.
DOME TYPE
HITRON
3.3 PRESET LOCKOUT
TO LOCKOUT THE ABILITY TO SET OR CLEAR PRESETS:
PRESET ENABLE
YES
Use the POUND (#) key to scroll to
Preset Enable. The current setting will
be displayed.
Press the STAR (*) key to change the
setting. Press the POUND (#) key to
select. Press MENU to exit the menu
mode.
Press the MENU button. Enter password
if necessary.
PRESET ENABLE
NO
2.7 ALARMS
Up to 8 alarms can be programmed into the VLC485. When an alarm occurs, the
ALARM message shows in the display window.
CAM 06
ALARM 07
The VLC485 sends a command to that camera telling it to go to the preset point. When
an alarm occurs at that position, the VLC485 will display that camera and alarm. A
beep also sounds from the unit.
To clear an alarm, press the ALARM button.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels