Moog PB24M24 Instructions d'exploitation télécharger pdf (Page 11)

Wireless Security Options

2.2

Select the Encryption method that is desired

and enter the appropriate encryption key. Note

that this same key will need to be entered in

all devices connecting to the wireless network.

Click the Change button in the bottom right

hand corner to apply the security settings.

Encryption for the wireless link is also set from the main Wireless conguration page.

Adding Multiple PB24M Series Devices to a Wireless Network

By default each PB24M Series is congured with the

IP address of 192.168.1.100. If there is more than one

PB24M Series on the wireless network, then you will need

to change the default IP addresses on each additional

device. For example Unit 1 could retain the default IP

address of 192.168.1.100. Unit 2 would need to have its

address changed, so it could have 192.168.1.101 assigned

to the Network Conguration. Unit 3 could have addresses

of 192.168.1.102, and so on for each additional device.

NOTE – When conguring multiple PB24M Series devices

for the rst time, make sure that only one device is

powered on at a time. Powering on two devices with a

default conguration will cause IP address conicts on

a network since each of the devices will have the same

addresses assigned to their interfaces.

PB24M58 IP CONFIGURATION

Changing the Default SSID

3.1

The default SSID for the PB24M Series is Moog. If the SSID needs to be changed from the default, then the SSID

must be changed on ALL wireless devices in the network on all PB24M Series devices.

1 2 ... 6 7 8 9 10 11 12 13

Pas de commentaire

Moog PB24M24 Instructions d'exploitation Page 11